|
Tri-Flex
- 1100 Series - Multi-Purpose Plastisol Inks
Tri-Flex 1100 Series plastisol, is formulated for direct
wet-on-wet printing of athletic and leisure garments
and can also be used for the manufacture of plastisol
transfers.
Tri-Puffs
- 1300 Series - Foam Expanding Plastisol Inks
Tri-Puff 1300 Series plastisol is formulated for direct
printing of athletic and leisure garments to give a
raised tri-dimensional effect when cured.
Tri-Suede
Puff – 1600 Series
Tri-Suede Puff 1600 Series plastisol is formulated for
direct printing of athletic and leisure garments to
give a raised tri-dimensional effect with a distinctive
“suede like texture” when cured. The final
effect is softer than traditional puff effects, and
has greater elasticity.
Thermo-Peel
- 1400 Series
Thermo-Peel 1400 Series plastisol is formulated for
the manufacture of hot-peel transfers. This series,
especially in the Neon Colors, can be directly printed
on suitable stock as well. Transfers can be made for
use on dark grounds using the standard colors or the
1400-1300 puff opaque underbase under the Process colors.
Sta-True
- 1700 Series - Low Bleed, Opaque Plastisol Inks
Sta-True 1700 Series plastisol is formulated for printing
on polyester and 50/50 polyester/cotton blends for minimal
bleed where normal plastisol films would be discolored
due to the fabric dyes bleeding into the screen printed
film.
Triangle
Matching System - 900 Series - Color Mixing Ink System
The 900 series provides color matching to popular PMS
colors. The matching system consists of intermixable
finished inks, which are fully curable. Virtually any
color can be selected and matched efficiently by using
one of three formula guide options available. Our lab
is available via telephone or fax to provide any technical
assistance you may need. This series is available in
two separate systems; they are the 900-2 and the 900-3
systems. The 900-2 system is formulated for opaque applications
directly on the garment or over a white underlay. The
900-3 system is recommended for use where higher meshes
and a softer feel is required.
FRP
Series-Fire Retardant Plastisol Inks
FRP Fire Retardant Plastisols contain active efficient
fire retadant additives for the printing and decorating
of fabrics treated for fire retardance.
Textile
Color - Concentrates
These Color Concentrates have been formulated to provide
suitable color dispersions compatible with all of our
Plastisol Ink Series. They can be utilized to alter
the shades of existing colors, or to create new colors
from scratch when incorporated into any of our extensive
ink bases.
N-Series
- Nylon Mesh Inks
The Nylon Mesh Series is intended for use on nylon mesh
jerseys. The Nylon series offers good adhesion and abrasion
resistance when properly cured.
H-D
Series - High Density Matte Finish
The High Density Series is formulated to give a 3-D
(three dimensional) film effect. The ability to fully
crosslink and cure at normal temperatures ensures adequate
adhesion with superior flexibility to give a high definition
film. The full aesthetic value of these inks depends
on the artwork and often involves complex designs
STRC
SERIES - Stretch Inks - High Elongation Inks
The Stretch Series is formulated to give great elasticity
when printed on stretchable fabrics such as Spandex™
and Lycra™ or any other stretchable fabric. When
these inks are properly cured, they will stretch with
the fabric. This ink comes ready to use; if the ink
needs to be reduced, it is recommended that 1180-51
Reducer be used sparingly.
|
